Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates

S Lotfian, C Mayer, N. Chawla, J Llorca, A Misra, JK Baldwin, JM Molina-Aldareguía

Research output: Contribution to journalArticlepeer-review

27 Citations (Scopus)


Composite laminates on the nanoscale have shown superior hardness and toughness, but little is known about their high temperature behavior. The mechanical properties (elastic modulus and hardness) were measured as a function of temperature by means of nanoindentation in Al/SiC nanolaminates, a model metal–ceramic nanolaminate fabricated by physical vapor deposition. The influence of the Al and SiC volume fraction and layer thicknesses was determined between room temperature and 150 °C and, the deformation modes were analyzed by transmission electron microscopy, using a focused ion beam to prepare cross-sections through selected indents. It was found that ambient temperature deformation was controlled by the plastic flow of the Al layers, constrained by the SiC, and the elastic bending of the SiC layers. The reduction in hardness with temperature showed evidence of the development of interface-mediated deformation mechanisms, which led to a clear influence of layer thickness on the hardness.
Original languageEnglish
Pages (from-to)260-267
Number of pages8
JournalThin Solid Films
Issue numberPart 2
Publication statusPublished - 28 Nov 2014


  • metal–ceramic composite
  • multilayers
  • layer thickness
  • nanolaminate
  • high temperature nanomechanics
  • nanoindentation

Cite this