Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures

Research output: Contribution to journalArticlepeer-review

16 Citations (Scopus)
241 Downloads (Pure)


In this work, we demonstrate hybrid optical-fibre/geopolymer sensors for monitoring temperature, uniaxial strain and biaxial strain in concrete structures. The hybrid sensors detect these measurands via changes in geopolymer electrical impedance, and via optical wavelength measurements of embedded fibre Bragg gratings. Electrical and optical measurements were both facilitated by metal-coated optical fibres, which provided the hybrid sensors with a single, shared physical path for both voltage and wavelength signals. The embedded fibre sensors revealed that geopolymer specimens undergo 2.7 mepsilon of shrinkage after one week of curing at 42 °C. After curing, an axial 2 mepsilon compression of the uniaxial hybrid sensor led to impedance and wavelength shifts of 7 × 10−2 and −2 × 10−4 respectively. The typical strain resolution in the uniaxial sensor was 100 $\mu \varepsilon $. The biaxial sensor was applied to the side of a concrete cylinder, which was then placed under 0.6 mepsilon of axial, compressive strain. Fractional shifts in impedance and wavelength, used to monitor axial and circumferential strain, were 3 × 10−2 and 4 × 10−5 respectively. The biaxial sensor's strain resolution was approximately 10 $\mu \varepsilon $ in both directions. Due to several design flaws, the uniaxial hybrid sensor was unable to accurately measure ambient temperature changes. The biaxial sensor, however, successfully monitored local temperature changes with 0.5 °C resolution.
Original languageEnglish
Article number045011
Number of pages8
JournalSmart Materials and Structures
Issue number4
Publication statusPublished - 24 Feb 2015


  • remote sensing
  • geopolymer sensors
  • health monitoring
  • fibre sensors

Cite this