TY - JOUR
T1 - Viscous froth lens
AU - Green, T. E.
AU - Bramley, A.
AU - Lue, L.
AU - Grassia, P.
PY - 2006/11
Y1 - 2006/11
N2 - Microscale models of foam structure traditionally incorporate a balance
between bubble pressures and surface tension forces associated with
curvature of bubble films. In particular, models for flowing foam
microrheology have assumed this balance is maintained under the action
of some externally imposed motion. Recently, however, a dynamic model
for foam structure has been proposed, the viscous froth model, which
balances the net effect of bubble pressures and surface tension to
viscous dissipation forces: this permits the description of
fast-flowing foam. This contribution examines the behavior of the
viscous froth model when applied to a paradigm problem with a
particularly simple geometry: namely, a two-dimensional bubble "lens."
The lens consists of a channel partly filled by a bubble (known as the
"lens bubble") which contacts one channel wall. An additional film
(known as the "spanning film") connects to this bubble spanning the
distance from the opposite channel wall. This simple structure can be
set in motion and deformed out of equilibrium by applying a pressure
across the spanning film: a rich dynamical behavior results. Solutions
for the lens structure steadily propagating along the channel can be
computed by the viscous froth model. Perturbation solutions are
obtained in the limit of a lens structure with weak applied pressures,
while numerical solutions are available for higher pressures. These
steadily propagating solutions suggest that small lenses move faster
than large ones, while both small and large lens bubbles are quite
resistant to deformation, at least for weak applied back pressures. As
the applied back pressure grows, the structure with the small lens
bubble remains relatively stiff, while that with the large lens bubble
becomes much more compliant. However, with even further increases in
the applied back pressure, a critical pressure appears to exist for
which the steady-state structure loses stability and unsteady-state
numerical simulations show it breaks up by route of a topological
transformation.
AB - Microscale models of foam structure traditionally incorporate a balance
between bubble pressures and surface tension forces associated with
curvature of bubble films. In particular, models for flowing foam
microrheology have assumed this balance is maintained under the action
of some externally imposed motion. Recently, however, a dynamic model
for foam structure has been proposed, the viscous froth model, which
balances the net effect of bubble pressures and surface tension to
viscous dissipation forces: this permits the description of
fast-flowing foam. This contribution examines the behavior of the
viscous froth model when applied to a paradigm problem with a
particularly simple geometry: namely, a two-dimensional bubble "lens."
The lens consists of a channel partly filled by a bubble (known as the
"lens bubble") which contacts one channel wall. An additional film
(known as the "spanning film") connects to this bubble spanning the
distance from the opposite channel wall. This simple structure can be
set in motion and deformed out of equilibrium by applying a pressure
across the spanning film: a rich dynamical behavior results. Solutions
for the lens structure steadily propagating along the channel can be
computed by the viscous froth model. Perturbation solutions are
obtained in the limit of a lens structure with weak applied pressures,
while numerical solutions are available for higher pressures. These
steadily propagating solutions suggest that small lenses move faster
than large ones, while both small and large lens bubbles are quite
resistant to deformation, at least for weak applied back pressures. As
the applied back pressure grows, the structure with the small lens
bubble remains relatively stiff, while that with the large lens bubble
becomes much more compliant. However, with even further increases in
the applied back pressure, a critical pressure appears to exist for
which the steady-state structure loses stability and unsteady-state
numerical simulations show it breaks up by route of a topological
transformation.
KW - foams
KW - rheology
KW - bubbles
KW - surface tension
KW - deformation
UR - http://link.aps.org/abstract/PRE/v74/e051403
U2 - 10.1103/PhysRevE.74.051403
DO - 10.1103/PhysRevE.74.051403
M3 - Article
VL - 74
JO - Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics
JF - Physical Review E: Statistical Physics, Plasmas, Fluids, and Related Interdisciplinary Topics
SN - 1539-3755
IS - 5
M1 - 051403
ER -